Part Number
Part Number:
NSN:
NIIN:
Item Name:
MICROCIRCUIT , LINEAR
Definition:
A MICROCIRCUIT WHOSE OUTPUT IS A FUNCTION OF THE INPUT; THAT IS, THE OUTPUT VARIES IN A PREDETERMINED AND ESSENTIALLY PREDICTABLE MANNER FROM THE INPUT SIGNAL.
CAGE Information
| Code | Company |
|---|---|
| 12969 | MICRO USPD INC |
Federal Supply Class
Title
MICROCIRCUITS, ELECTRONIC
Inclusions:
INCLUDES INTEGRATED CIRCUIT DEVICES; INTEGRATED CIRCUIT MODULES, INTEGRATED ELECTRONIC DEVICES: HYBRID, MAGNETIC, MOLECULAR, OPTO-ELECTRONIC, AND THIN FILM.
Exclusions:
EXCLUDES SINGLE CIRCUIT ELEMENTS SUCH AS CAPACITORS; RESISTORS; DIODES AND TRANSISTORS; PRINTED CIRCUIT BOARDS AND CIRCUIT CARD ASSEMBLIES; AND FILTERS AND NETWORKS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AEHX | MAXIMUM POWER DISSIPATION RATING | 62.0 WATTS |
| AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS |
| AGAV | END ITEM IDENTIFICATION | LANDING CONTROL CENTRAL TYPE AN/TPN-19 |
| CZEQ | TIME RATING PER CHACTERISTIC | 150.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT AND 300.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| CQZP | INPUT CIRCUIT PATTERN | 2 INPUT |
| ADAQ | BODY LENGTH | 1.543 INCHES MINIMUM AND 1.573 INCHES MAXIMUM |
| CQSJ | INCLOSURE MATERIAL | GLASS AND METAL |
| CBBL | FEATURES PROVIDED | HYBRID AND HERMETICALLY SEALED AND POSITIVE OUTPUTS |
| ADAU | BODY HEIGHT | 0.250 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| AFJQ | STORAGE TEMP RANGE | -65.0/+150.0 DEG CELSIUS |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 80.0 VOLTS MAXIMUM POWER SOURCE |
| CSSL | DESIGN FUNCTION AND QUANTITY | 1 REGULATOR, SWITCHING |
| ADAT | BODY WIDTH | 1.030 INCHES MINIMUM AND 1.050 INCHES MAXIMUM |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | T0-3 JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| CQSZ | INCLOSURE CONFIGURATION | CAN |
| TEST | TEST DATA DOCUMENT | 04971-109499 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |