Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 28718 | THE HILLIARD CORPORATION |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| APGF | DESIGN TYPE | NONREUSABLE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| ADNK | FLOW DIRECTION | OUTSIDE IN |
| ADNP | DROP PRESSURE | NOT RATED |
| ADNQ | DIFFERENTIAL PRESSURE | NOT RATED |
| CRXW | FILTERING MEDIA DESIGN | PERFORATED 1ST FILTERING MEDIA RESPONSE |
| ADNH | FILTRATION RATING IN MICRONS | 10.0 NOMINAL |
| AZKQ | TEMP RATING | NOT RATED |
| CRXW | FILTERING MEDIA DESIGN | PLEATED 2ND FILTERING MEDIA RESPONSE |
| ABPM | BODY DIAMETER | 2.757 INCHES NOMINAL |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| AKSW | PERFORATION QUANTITY | 18.0 PER SQUARE INCH |
| AZTL | BODY OVERALL LENGTH | 9.625 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) |
| ADAS | BODY INSIDE DIAMETER | 1.032 INCHES NOMINAL |
| MATT | MATERIAL | STEEL CONTAINER/CARTRIDGE |
| AKSV | PERFORATION DIAMETER | 0.120 INCHES NOMINAL |
| MATT | MATERIAL | PAPER FILTERING MEDIUM |