Part Number
Part Number:
NSN:
NIIN:
Item Name:
RIVET , BLIND
Definition:
AN ITEM CONSISTING OF TWO OR MORE OF THE FOLLOWING COMPONENTS: STEM, RIVET BODY, SLEEVE, EXPANDER, BOLT, AND COLLAR. IT IS A HEADED FASTENING DEVICE WITH THE SHANK DESIGNED TO BE EXPANDED BY MEANS OF A SEPARATE OR INTEGRAL STEM OR MANDREL, OR BOLT AND EXPANDER. IT IS DESIGNED TO BE INSTALLED OR EXPANDED FROM ONE SIDE ONLY. EXCLUDES NUT, BLIND ASSEMBLY.
CAGE Information
| Code | Company |
|---|---|
| 92215 | ALCOA GLOBAL FASTENERS INC. DBA ALCO |
Federal Supply Class
Title
RIVETS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MATT | MATERIAL | STEEL COMP 4130 NUT OR STEEL COMP 4140 NUT OR STEEL COMP 8740 NUT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| MATT | MATERIAL | STEEL COMP 4130 BOLT OR STEEL COMP 4140 BOLT OR STEEL COMP 8740 BOLT |
| AASK | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | IL-S-5626 FED STD 10TH MATERIAL RESPONSE BOLT OR IL-S-6758 FED SPEC 10TH MATERIAL RESPONSE BOLT OR IL-S-6049 MIL SPEC 10TH MATERIAL RESPONSE BOLT |
| ABAJ | LUBRICATION | WAX OR CETYL ALCOHOL OR SOLID FILM |
| AAZG | HEAD MAJOR DIAMETER | 0.342 INCHES NOMINAL |
| ABAF | EXPANSION DEVICE | THREADED SLEEVE |
| AAZF | SHANK STYLE | THREADED SELF-PLUGGING SHANK W/SLEEVE |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | T-38 ACFT |
| FEAT | SPECIAL FEATURES | ORIGINAL NAME: FASTENER |
| CQFM | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM BOLT AND 43.0 ROCKWELL C MAXIMUM BOLT |
| ANEE | GRIP LENGTH | 0.720 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | CADMIUM SLEEVE |
| SFTT | SURFACE TREATMENT | CADMIUM BOLT |
| CQFM | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM NUT AND 43.0 ROCKWELL C MAXIMUM NUT |
| MATT | MATERIAL | STEEL COMP 303 SLEEVE OR STEEL COMP 304 SLEEVE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SFTT | SURFACE TREATMENT | CADMIUM NUT |
| AAZE | SHANK DIAMETER | 0.2290 INCHES MINIMUM AND 0.2300 INCHES MAXIMUM |