Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 01121 | ROCKWELL AUTOMATION INC. |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CBME | CUBIC MEASURE | 0.150 CUBIC INCHES |
| AEEA | SWITCH TYPE | ROTARY |
| AAPN | SECTION QUANTITY | 1 |
| CSDL | STANDARD TAPER CURVE PER SECTION | C SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AEFM | MAXIMUM STOP TORQUE | 64.00 INCH-OUNCES |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AAQL | BODY STYLE | RECTANGULAR W/BUSHING |
| ABXF | SHAFT LENGTH | 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| ABNB | FIRST FLAT LENGTH | 0.250 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.594 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.735 INCHES NOMINAL |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEDX | SHAFT STYLE | ROUND, FLATTED |
| ADAT | BODY WIDTH | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| AEGH | SWITCH OPERATING POSITION | START OF ROTATION |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AGAV | END ITEM IDENTIFICATION | 5820-01-221-3440 RADIO SET |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 100.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AEFL | MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES |
| ABNC | FLAT HEIGHT | 0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| APXH | TERMINAL LOCATION | REAR-BOTTOM |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AEFK | MAXIMUM STARTING TORQUE | 3.00 INCH-OUNCES |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 125.0 AND 28.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 248.0 NOMINAL |
| ABWV | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | 0.500 AC AND 1.500 DC |
| TEST | TEST DATA DOCUMENT | 04655-37-513950 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 TAB, SOLDER LUG |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 7TH SECONDARY QUALITY |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 290.0 MINIMUM AND 300.0 MAXIMUM |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 3.0 |
| CBBL | FEATURES PROVIDED | SWITCH |