Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY) OF THE OUTPUT IS EQUAL TO OR LESS THAN PLUS OR MUNUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE, FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
CAGE Information
| Code | Company |
|---|---|
| 07421 | INTERSTATE ELECTRONICS CORPORATION |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AEDX | SHAFT STYLE | ROUND |
| ABPM | BODY DIAMETER | 0.875 INCHES NOMINAL |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| AEFM | MAXIMUM STOP TORQUE | 100.00 INCH-OUNCES |
| AAVL | PILOT DIAMETER | 0.6250 INCHES NOMINAL |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 7.5 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0/+3.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.5 FREE AIR SINGLE SECTION |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 25.5 SINGLE SECTION |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3455.0 NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.781 INCHES NOMINAL |
| AEGB | PILOT DIAMETER RUNOUT | 0.002 INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 51.1 KILOHMS SINGLE SECTION |
| AEFY | SHAFT END PLAY | 0.002 INCHES |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| AECZ | MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3455.0 NOMINAL |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| AEFL | MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES |
| AXGY | MOUNTING METHOD | CLAMP RING |
| AEFK | MAXIMUM STARTING TORQUE | 0.60 INCH-OUNCES |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -10.0/+10.0 DEG ANGULAR ROTATION SINGLE SECTION |
| ABXF | SHAFT LENGTH | 0.391 INCHES NOMINAL |
| AEFZ | SHAFT RUNOUT | 0.002 INCHES |
| ADAQ | BODY LENGTH | 1.583 INCHES MAXIMUM |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10/+0.10 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 1728.0 SINGLE SECTION |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TAB, SOLDER LUG |