Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OF MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 07421 | INTERSTATE ELECTRONICS CORPORATION |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 100.000 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| AXGY | MOUNTING METHOD | CLAMP RING AND THREADED HOLE |
| ABXF | SHAFT LENGTH | 0.625 INCHES NOMINAL |
| AEFY | SHAFT END PLAY | 0.00500 INCHES |
| ABPM | BODY DIAMETER | 2.000 NOMINAL INCHES |
| AAPN | SECTION QUANTITY | 1 |
| AEDX | SHAFT STYLE | ROUND |
| AECZ | MOUNTING LIP DIAMETER | 1.8750 INCHES MAXIMUM |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| AEDZ | SHAFT BEARING TYPE | BALL |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 7 OCLOCK ALL PRIMARIES |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0/+3.0 SINGLE SECTION |
| AEFK | MAXIMUM STARTING TORQUE | 1.20 INCH-OUNCES |
| AJYN | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 8.0 7TH SECONDARY QUALITY |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25/+0.25 SINGLE SECTION |
| AEFM | MAXIMUM STOP TORQUE | 1000.00 INCH-OUNCES |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| ABHP | OVERALL LENGTH | 2.610 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.813 INCHES NOMINAL |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| AEGB | PILOT DIAMETER RUNOUT | 0.00200 INCHES |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| ADAQ | BODY LENGTH | 1.985 INCHES NOMINAL |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AEDA | MOUNTING LIP DEPTH | 0.0620 NOMINAL INCHES |
| ABWV | SHAFT DIAMETER | 0.2497 INCHES MAXIMUM |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL |
| AAVL | PILOT DIAMETER | 0.7500 INCHES MAXIMUM |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL |
| APXH | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.250 INCHES NOMINAL |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 SINGLE SECTION |
| AEFZ | SHAFT RUNOUT | 0.002 INCHES |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 30.0 |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ADAV | OVERALL DIAMETER | 2.250 INCHES MAXIMUM |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AEFL | MAXIMUM RUNNING TORQUE | 0.80 INCH-OUNCES |