Part Number
Part Number:
NSN:
NIIN:
Item Name:
RESOLVER , ELECTRICAL
Definition:
AN ITEM CONSISTING OF A ROTOR AND A STATOR INDUCTIVELY COUPLED. IT USUALLY HAS TWO ROTOR WINDINGS DISPLACED FROM EACH OTHER BY 90 DEGREES AND TWO STATOR WINDINGS SIMILARLY DISPLACED. THE OUTPUT VOLTAGE(S) IS A TRIGONOMETRIC FUNCTION OF THE INPUT VOLTAGE(S) AND THE ANGULAR DISPLACEMENT OF THE ROTOR WITH RESPECT TO THE STATOR. SEE ALSO SYNCHRO (AS MODIFIED) AND GONIOMETER, ELECTRICAL. EXCLUDES TRANSOLVER, ELECTRICAL AND POTENTIOMETER SINE/COSINE ELECTRICAL RESOLVERS.
CAGE Information
| Code | Company |
|---|---|
| 09017 | EDO |
Federal Supply Class
Title
SYNCHROS AND RESOLVERS
Inclusions:
Exclusions:
EXCLUDES SYNCHRO SYSTEMS; SERVO MECHANISMS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AJSL | BODY SIZE | 15 |
| CQTM | TERMINAL LOCATION | REAR |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1870 INCHES NOMINAL |
| CQZS | SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 30.0 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 295.00 NOMINAL |
| TEST | TEST DATA DOCUMENT | 89264-C6010291 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AJVF | PHASE SHIFT ANGLE IN DEG | 5.000 INPUT TO OUTPUT NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 SCREW |
| CRHN | SHAFT SLOT WIDTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| AAQL | BODY STYLE | STANDARD ROUND B |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7910 INCHES NOMINAL |
| CRSJ | SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| AJWQ | PILOT LENGTH | 0.0400 INCHES NOMINAL |
| AJVK | OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1/+0.1 |
| ABKK | FLANGE DIAMETER | 1.4360 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0/+5.0 |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| CSJY | TRANSFORMATION RATIO | 0.985 ROTOR TO STATOR NOMINAL |
| AJWR | SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| AAVL | PILOT DIAMETER | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8750 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.5710 INCHES NOMINAL SINGLE SHAFT |
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | 295.00 NOMINAL |
| AAVH | SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| AAFZ | BODY MATERIAL | STEEL, STAINLESS |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| AJVD | COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 1.000 ROTOR TO COMPENSATOR NOMINAL |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.5580 INCHES MINIMUM AND 2.6050 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1871 INCHES MINIMUM SINGLE SHAFT AND 0.1873 INCHES MAXIMUM SINGLE SHAFT |
| AJSP | STATOR INPUT CURRENT RATING | 10.0 MILLIAMPERES NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 200.00 NOMINAL |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |