Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 50599 | PARKER-HANNIFIN CORPORATION DBA STRA |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 45.0 |
| CQGM | MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL-H-27267 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| CTCJ | FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 1ST END |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.656 INCHES NOMINAL 1ST END |
| AJEE | RAISED FACE DIAMETER | 1.854 INCHES NOMINAL 1ST END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 1ST END |
| AARX | INSIDE DIAMETER | 1.125 INCHES NOMINAL |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | INCLUDED |
| ADJM | INNER CONVEYING TUBE MATERIAL | PLASTIC, POLYTETRAFLUOROETHYLENE |
| AJED | RAISED FACE HEIGHT | 0.030 INCHES NOMINAL 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| ABKV | OUTSIDE DIAMETER | 1.359 INCHES NOMINAL |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| AFQN | FLANGE LENGTH | 2.188 INCHES NOMINAL 1ST END |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | ERR-070 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 11.000 INCHES |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.656 INCHES NOMINAL 1ST END |
| CRXX | MEASURING METHOD AND LENGTH | 27.750 INCHES NOMINAL WORKING |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.266 INCHES NOMINAL 1ST END |
| AGFF | FLANGE WIDTH | 2.188 INCHES NOMINAL 1ST END |
| AHNC | CONNECTION STYLE | RAISED 1ST END |
| CQBD | BURST TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| ABJH | TEMP RATING | -100.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKU | FLANGE THICKNESS | 0.234 INCHES NOMINAL 1ST END |