Part Number
Definition:
A NUT, FLAT ON TOP AND BOTTOM HAVING 6 FLAT SIDES. FOR ITEMS WHICH HAVE INTERNAL TAPERED OR STRAIGHT (PARALLEL) PIPE THREADS, SPECIFIC ELECTRICAL CONDUIT SIZE DESIGNATION, AND WHICH WHEN INSTALLED, PROVIDE A METHOD OF TIGHTENING TO LOCK THE CONNECTION, SEE LOCKNUT, ELECTRICAL CONDUIT. SEE ALSO LOCKNUT, TUBE FITTING. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE WIDTH ACROSS THE FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. (WHEN HEIGHT OR THICKNESS AND/OR WIDTH ACROSS THE FLATS IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
CAGE Information
| Code | Company |
|---|---|
| 14351 | TELEDYNE CONTINENTAL MOTORS INDUSTRI |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADEA | NUT HEIGHT | 1.484 INCHES MINIMUM AND 1.516 INCHES MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 1.125 INCHES |
| CRTM | BEARING SURFACE TYPE | WASHER FACED |
| CQFM | HARDNESS RATING | NOT RATED |
| ASDB | WIDTH ACROSS FLATS | 1.609 INCHES MINIMUM AND 1.641 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRSQ | COUNTERSINK ANGLE | 88.0 DEGREES MINIMUM NUT AND 92.0 DEGREES MAXIMUM NUT |
| AAJD | THREAD CLASS | 3B |
| AZKQ | TEMP RATING | NOT RATED |
| ACTA | NUT STYLE | HEXAGON |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| BZRR | THREAD SERIES | UN |
| MATT | MATERIAL | STEEL COMP 1019 OVERALL OR STEEL COMP 1017 OVERALL OR STEEL COMP 1016 OVERALL OR STEEL COMP 1015 OVERALL OR STEEL COMP 1212 OVERALL OR STEEL COMP 1020 OVERALL OR STEEL COMP 1023 OVERALL OR STEEL COMP 1022 OVERALL OR STEEL COMP 1018 OVERALL OR STEEL COMP 1021 OVERALL OR STEEL COMP 1524 OVERALL OR STEEL COMP 1025 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL OR ASTM A108 ASSN STD 1ST MATERIAL RESPONSE OVERALL |