Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 14351 | TELEDYNE CONTINENTAL MOTORS INDUSTRI |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ATPC | STEP QUANTITY | 6 |
| AMDL | FIRST END DIAMETER | 0.7500 INCHES MINIMUM AND 0.7510 INCHES MAXIMUM |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.187 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 8640 |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 1.218 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.6250 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 10.312 INCHES NOMINAL |
| AMHD | SECOND END HOLE DEPTH | 0.625 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 0.983 INCHES MINIMUM AND 0.984 INCHES MAXIMUM |
| AAHP | SECOND END STYLE | CROSS DRILLED AND EXTERNALLY THREADED |
| AMGS | SECOND END HOLE DIAMETER | 0.1562 INCHES NOMINAL |