Part Number
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTRUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE OUTSIDE DIAMETER, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. SEE ALSO NUT (1), PLAIN, KNURLED. (WHEN HEIGHT OR THICKNESS AND/OR OUTSIDE DIAMETER IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
CAGE Information
| Code | Company |
|---|---|
| 63857 | WARREN PUMPS LLC |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18411,CLASS 2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ALET | HOLE TYPE AND QUANTITY | 1 TAPPED |
| AFGF | DRIVE POINT DIAMETER | 0.250 INCHES NOMINAL |
| ACTD | NUT DIAMETER | 2.000 INCHES NOMINAL |
| ADBM | DRIVE POINT QUANTITY | 2 |
| CQFM | HARDNESS RATING | NOT RATED |
| CQTW | HOLE THREAD QUANTITY PER INCH | 16 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION J |
| CSPF | HOLE NOMINAL THREAD DIAMETER | 0.375 INCHES |
| AAJD | THREAD CLASS | 3B |
| AZKQ | TEMP RATING | NOT RATED |
| MATT | MATERIAL | STEEL COMP 1213 OVERALL |
| BZRR | THREAD SERIES | UN |
| ADBG | NUT THICKNESS | 0.375 INCHES NOMINAL |
| ACTA | NUT STYLE | ROUND |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES |