Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 00736 | FALLS FILTRATION TECHNOLOGIES INC. |
Federal Supply Class
Title
ENGINE FUEL SYSTEM COMPONENTS, A
Inclusions:
INCLUDES CARBURETORS; FUEL PUMPS; ENGINE FUEL FILTERS; FUEL CONTROLS, JET ENGINE; FUEL PRIMERS; WATER INJECTION CONTROLS AND VALVES; FUEL VALVES FUEL FLOW REGULATORS; COMPONENTS OF SMOKE ABATEMENT SYSTEMS.
Exclusions:
EXCLUDES AIRCRAFT FUEL TANKS (FSC 1560); IN-FLIGHT REFUELING SYSTEM FUEL COMPONENTS (FSC 1680). FUEL SYSTEM COMPONENTS NOT SPECIFICALLY DESIGNED FOR USE WITH AIRCRAFT ENGINES OR MISSILE PRIME-MOVERS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| SFTT | SURFACE TREATMENT | ANODIZE BODY |
| ADNK | FLOW DIRECTION | OUTSIDE IN |
| SFTT | SURFACE TREATMENT | PASSIVATE FILTERING MEDIUM |
| CQJX | NOMINAL THREAD SIZE | 1.3125 INCHES |
| ABPM | BODY DIAMETER | 1.192 INCHES NOMINAL |
| AZTL | BODY OVERALL LENGTH | 1.492 INCHES MINIMUM AND 1.532 INCHES MAXIMUM |
| ADNQ | DIFFERENTIAL PRESSURE | 150.0 POUNDS PER SQUARE INCH |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/INTEGRAL OUTER CASING |
| MATT | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM |
| CRXW | FILTERING MEDIA DESIGN | MESH 1ST FILTERING MEDIA RESPONSE |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| APGF | DESIGN TYPE | LIMITED |
| CRXW | FILTERING MEDIA DESIGN | MESH 2ND FILTERING MEDIA RESPONSE OR SINTERED 2ND FILTERING MEDIA RESPONSE |
| FEAT | SPECIAL FEATURES | 3 FILTERING SCREENS: 50X50 DRAINAGE SCREEN; 84X84 BACKING MESH,325X325 FACING MESH,SINTERED ASSY; USED ON MAIN FUEL PUMP,708000,F100 ACFT ENG |
| THSD | THREAD SERIES DESIGNATOR | UNJ |
| CRXW | FILTERING MEDIA DESIGN | MESH 3RD FILTERING MEDIA RESPONSE OR SINTERED 3RD FILTERING MEDIA RESPONSE |
| ADNP | DROP PRESSURE | 1.0 POUNDS PER SQUARE INCH |
| ADNH | FILTRATION RATING IN MICRONS | 45.0 ABSOLUTE |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 BODY |