Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OF MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 81349 | MILITARY SPECIFICATIONS PROMULGATED |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 290.0 MINIMUM AND 305.0 MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.344 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| AAPN | SECTION QUANTITY | 1 |
| CSDL | STANDARD TAPER CURVE PER SECTION | C SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AEFK | MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AEFN | NONTURN DEVICE LOCATION | AT 9 OCLOCK |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| ABPM | BODY DIAMETER | 1.100 NOMINAL MILS AND 1.310 NOMINAL CENTIMETERS |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEFP | NONTURN DEVICE RADIUS | 0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| CBBL | FEATURES PROVIDED | PANEL SEAL AND SHAFT SEAL |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.1 7TH SECONDARY QUALITY |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-19 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFM | MAXIMUM STOP TORQUE | 128.00 INCH-OUNCES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.5 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| ADAQ | BODY LENGTH | 0.570 INCHES MINIMUM AND 0.700 INCHES MAXIMUM |
| CBME | CUBIC MEASURE | 0.790 CUBIC INCHES |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| AEFL | MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES |
| ABWV | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-19/2 GOVERNMENT SPECIFICATION |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 290.0 MINIMUM AND 305.0 MAXIMUM |