Part Number
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
CAGE Information
| Code | Company |
|---|---|
| 51663 | CRANE CO. DBA LEAR ROMEC |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAGZ | FIRST END STYLE | PLAIN |
| AAGZ | FIRST END STYLE | PLAIN |
| ABHP | OVERALL LENGTH | 0.875 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6709 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| AMDL | FIRST END DIAMETER | 0.3100 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | 0.244 IN. SQ SHAFT,BOTH ENDS CHAMFERED 45.0 DEG ANGLE BY 0.032 IN. LG,ONE END GROOVED 0.181 IN. DIA BY 0.034IN. W LOCATED 0.720 IN. FROM OPPOSITE END |
| AAHN | END SIMILARITY | IDENTICAL |