Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 97979 | REON RESISTOR CORP |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0/+20.0 1ST SECTION |
| ABXF | SHAFT LENGTH | 0.625 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.500 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0/+20.0 2ND SECTION |
| AAPN | SECTION QUANTITY | 2 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.000 GALLONS PER MINUTE C AND BETTER FINISH |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.000 GALLONS PER MINUTE C AND BETTER INDUSTRIAL CLEARS |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFP | NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| ADAV | OVERALL DIAMETER | 1.062 INCHES NOMINAL |
| AEFN | NONTURN DEVICE LOCATION | AT 3 OCLOCK AND AT 9 OCLOCK |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |