Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 07806 | NATIONAL METALCRAFTERS INC |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMDL | FIRST END DIAMETER | 0.3750 INCHES MINIMUM AND 0.3755 INCHES MAXIMUM |
| AAGZ | FIRST END STYLE | PLAIN |
| MATT | MATERIAL | STEEL COMP 302 |
| ABHP | OVERALL LENGTH | 1.938 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 0.615 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | 0.110 INCH SQUARE HOLE FIRST END; PARTIAL BORE 0.156 INCH SECOND END |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 302,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES |
| ATPC | STEP QUANTITY | 4 |
| AAHN | END SIMILARITY | IDENTICAL |