Part Number
Part Number:
NSN:
NIIN:
Item Name:
RESISTOR , FIXED , WIRE WOUND
Definition:
A RESISTOR WHOSE OHMIC VALUE CANNOT BE ADJUSTED OR VARIED. THE RESISTANCE ELEMENT CONSISTS OF HIGH RESISTANCE WIRE (OR RIBBON) EITHER WOUND ON AN INSULATED FORM OR CONSTRUCTED SO AS TO BE SELF SUPPORTING. OPPOSITION TO THE FLOW OF CURRENT IS AN INHERENT PROPERTY OF THE RESISTANCE WIRE AND IS MANIFEST BY THE HEAT DISSIPATION IN THE RESISTOR. EXCLUDES SUPPRESSOR, IGNITION INTERFERENCE.
CAGE Information
| Code | Company |
|---|---|
| 81349 | MILITARY SPECIFICATIONS PROMULGATED |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAQD | HEAT SINK HEIGHT | 2.000 INCHES |
| AAQD | HEAT SINK HEIGHT | 2.000 INCHES |
| AARE | REACTANCE CHARACTERISTIC | INDUCTIVE |
| ADAQ | BODY LENGTH | 0.600 INCHES NOMINAL |
| ABJT | TERMINAL LENGTH | 0.266 INCHES NOMINAL |
| BYML | MOUNTING HOLE SIZE | 0.093 INCHES NOMINAL |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AAQB | HEAT SINK WIDTH | 4.000 INCHES |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| AAQA | HEAT SINK LENGTH | 6.000 INCHES |
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -100.0/+100.0 |
| ADAU | BODY HEIGHT | 0.320 INCHES NOMINAL |
| AAPP | ELECTRICAL RESISTANCE | 0.357 OHMS |
| STYL | STYLE DESIGNATOR | AXIAL TERMINAL (S) |
| AAQZ | INCLOSURE METHOD | ENCASED |
| AAPZ | HEAT SINK MATERIAL | ALUMINUM ALLOY |
| AAQF | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0/+275.0 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000/+1.000 |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-39009 SPECIFICATION |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-39009/1 GOVERNMENT SPECIFICATION |
| AAQE | HEAT SINK THICKNESS | 0.040 INCHES |
| AEFB | POWER DISSIPATION RATING IN WATTS | 3.000 FREE AIR |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| ADAT | BODY WIDTH | 0.334 INCHES NOMINAL |
| AARB | TERMINAL TYPE | TAB, SOLDER LUG |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.444 INCHES NOMINAL |