Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 81349 | MILITARY SPECIFICATIONS PROMULGATED |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 7TH SECONDARY QUALITY |
| TEST | TEST DATA DOCUMENT | 81394-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AAPN | SECTION QUANTITY | 1 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.700 NOMINAL INCHES |
| ABTB | MOUNTING HOLE DIAMETER | 0.093 NOMINAL INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 25.000 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| AFJN | FRAGILITY FACTOR | RUGGED |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| AEFL | MAXIMUM RUNNING TORQUE | 8.00 INCH-OUNCES |
| ADAT | BODY WIDTH | 0.190 INCHES NOMINAL |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 6120.0 MINIMUM AND 9720.0 MAXIMUM |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 6120.0 MINIMUM AND 9720.0 MAXIMUM |
| ADAU | BODY HEIGHT | 0.315 INCHES NOMINAL |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABWV | SHAFT DIAMETER | 0.115 INCHES NOMINAL |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-22097/2 GOVERNMENT SPECIFICATION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| AEFK | MAXIMUM STARTING TORQUE | 8.00 INCH-OUNCES |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.058 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.250 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | TERMINAL AND UNTHREADED HOLE |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| ABJT | TERMINAL LENGTH | 0.500 INCHES NOMINAL |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0/+100.0 SINGLE SECTION |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.900 INCHES NOMINAL |