Part Number
Part Number:
NSN:
NIIN:
Item Name:
MOTOR , ALTERNATING CURRENT
Definition:
A MOTOR WHICH IS DESIGNED FOR OPERATION FROM AN ALTERNATING CURRENT SOURCE. SEE ALSO MOTOR, CONTROL.
CAGE Information
| Code | Company |
|---|---|
| 05472 | BALDOR ELECTRIC CO |
Federal Supply Class
Title
MOTORS, ELECTRICAL
Inclusions:
Exclusions:
EXCLUDES STARTING MOTORS FOR ENGINES.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAJU | OVERALL LENGTH | 11.420 INCHES |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 3.500 INCHES SINGLE END |
| AXGY | MOUNTING METHOD | RESILIENT CRADLE |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 208.0 LINE TO NEUTRAL LOW INPUT OR 460.0 LINE TO NEUTRAL HIGH INPUT |
| ABWV | SHAFT DIAMETER | 0.624 INCHES MINIMUM SINGLE END AND 0.625 INCHES MAXIMUM SINGLE END |
| FAAZ | PHASE | THREE INPUT |
| CNXS | POWER RATING | 1.500 HORSEPOWER OUTPUT |
| CNMM | FRAME SIZE DESIGNATION | 56/56H |
| AAJV | OVERALL WIDTH | 6.620 INCHES |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 2.040 INCHES SINGLE END |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 5.500 INCHES |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED HOLE |
| CWHZ | SHAFT END CHARACTERISTIC | A9 SINGLE STYLE SINGLE END |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 5.000 INCHES |
| FREQ | FREQUENCY IN HERTZ | 60.0 INPUT |
| ANPZ | INCLOSURE FEATURE | OPEN |
| AFYS | KEYWAY LENGTH | 1.380 INCHES NOMINAL SINGLE END |
| CWDY | TEMP RATING | 40.0 AMBIENT DEG CELSIUS |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| AKPS | DUTY CYCLE | CONTINUOUS |
| CWFX | ROTOR SPEED RATING IN RPM | 1725.0 SINGLE FULL LOAD |
| ABRR | KEYWAY WIDTH | 0.190 INCHES NOMINAL SINGLE END |
| ABRV | KEYWAY DEPTH | 0.190 INCHES NOMINAL SINGLE END |
| AAJT | OVERALL HEIGHT | 6.810 INCHES |
| AGAV | END ITEM IDENTIFICATION | A/C MDL WMAC 7.5 SPL R-134A |
| BKPB | CURRENT RATING METHOD | LOAD |
| CWGL | CURRENT RATING IN AMPS | 2.400 LOW INPUT OR 5.000 HIGH INPUT |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | 0.340 INCHES |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | DRAWING)STANDARD RESIL MTD NEMA 56/56H OPEN 35M W/TERM PANEL(35E411) |