Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 81349 | MILITARY SPECIFICATIONS PROMULGATED |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 295.0 NOMINAL |
| AAPN | SECTION QUANTITY | 1 |
| ABHP | OVERALL LENGTH | 1.687 INCHES NOMINAL |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| ABPM | BODY DIAMETER | 0.500 NOMINAL INCHES |
| AFJN | FRAGILITY FACTOR | MODERATELY DELICATE |
| ADAV | OVERALL DIAMETER | 0.500 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 295.0 NOMINAL |
| CSDL | STANDARD TAPER CURVE PER SECTION | F SINGLE SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| CBBL | FEATURES PROVIDED | PANEL SEAL AND HUMIDITY PROOF AND SHAFT SEAL |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-94/3 GOVERNMENT SPECIFICATION |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABXF | SHAFT LENGTH | 0.875 INCHES NOMINAL |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CBME | CUBIC MEASURE | 0.133 CUBIC INCHES |
| AEFP | NONTURN DEVICE RADIUS | 0.245 INCHES NOMINAL |
| APXH | TERMINAL LOCATION | REAR END |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| ADAQ | BODY LENGTH | 0.531 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -3.0/+0.0 -55 DEG CELSIUS SINGLE SECTION AND -5.0/+10.0 25 DEG CELSIUS SINGLE SECTION AND -5.0/+10.0 -25 DEG CELSIUS SINGLE SECTION AND +0.0/+3.0 120 DEG CELSIUS SINGLE SECTION |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| AEFN | NONTURN DEVICE LOCATION | AT 4'30 OCLOCK AND AT 10'30 OCLOCK |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 7TH SECONDARY QUALITY |