Part Number
Part Number:
NSN:
NIIN:
Item Name:
RESISTOR , FIXED , FILM
Definition:
A RESISTOR WHOSE OHMIC VALUE CANNOT BE ADJUSTED OR VARIED. THE RESISTANCE ELEMENT CONSISTS OF EITHER A THIN LAYER OF CONDUCTIVE MATERIAL, CONTAINING EITHER BINDERS OR INSULATING MATERIALS, DEPOSITED ON AN INSULATED FORM; OR AN ALLOY OF METAL AND CERAMIC MATERIALS, USUALLY FUSED TO AN INSULATED FORM. OPPOSITION TO THE FLOW OF CURRENT IS AN INHERENT PROPERTY OF THE MATERIALS USED AND IS MANIFEST BY THE HEAT DISSIPATION IN THE RESISTOR. SEE ALSO ATTENUATOR, FIXED AND RESISTOR, FIXED, COMPOSITION. EXCLUDES CARBON COMPOSITION TYPE RESISTORS.
CAGE Information
| Code | Company |
|---|---|
| 18612 | VISHAY INTERTECHNOLOGY INC. |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAPP | ELECTRICAL RESISTANCE | 820.000 OHMS EACH RESISTOR |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 175.0 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000/+1.000 EACH RESISTOR |
| ADAQ | BODY LENGTH | 0.295 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.100 INCHES NOMINAL |
| AAQZ | INCLOSURE METHOD | ENCAPSULATED |
| STYL | STYLE DESIGNATOR | TERMINALS ONE EDGE |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ADAT | BODY WIDTH | 0.320 INCHES NOMINAL |
| AAQF | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 125.0 |
| ABJT | TERMINAL LENGTH | 1.500 INCHES MINIMUM |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0/+125.0 TEMP RANGE OF FIRST TEMP COEFFICIENT |
| AEFB | POWER DISSIPATION RATING IN WATTS | 0.300 FREE AIR |
| FEAT | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO2217. NAVICP ACTIVITY HX QUALITY CONTROL MANUFACTURINGAND TESTING SPECIFICATIONS NO LONGER APPLY TO THIS MATERIAL |
| AARB | TERMINAL TYPE | WIRE LEAD |
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -5.0/+5.0 FIRST TEMP COEFFICIENT |