Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 57928 | SONIC INDUSTRIES INC. |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AATB | WIDTH BETWEEN FLATS | 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.437 INCHES |
| AAUB | HOLE DIAMETER | 0.055 INCHES NOMINAL |
| AASU | HEAD HEIGHT | 0.425 INCHES MINIMUM AND 0.445 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 2.440 INCHES MINIMUM AND 2.470 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 4 |
| ANEE | GRIP LENGTH | 1.740 INCHES MINIMUM AND 1.760 INCHES MAXIMUM |
| CRHC | HOLE CONFIGURATION STYLE | HEXAGON LONGITUDINAL HOLE |
| BQDM | HOLE TYPE | DRILLED |
| AAUR | GRIP DIAMETER | 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| AATC | EXTENDED WASHER DIAMETER | 0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.680 INCHES MINIMUM AND 0.730 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AATD | EXTENDED WASHER THICKNESS | 0.089 INCHES MINIMUM AND 0.109 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AASK | HEAD STYLE | DOUBLE HEXAGON W/HOLE |