Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 9F512 | PARKER-HANNIFIN CORPORATION DBA HYDR |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMGA | SECOND END SPLINE LENGTH | 1.250 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 6 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMDE | FIRST END EXTERNAL KEYWAY LENGTH | 1.125 INCHES NOMINAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.7970 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.0000 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| BDSR | SECOND END SPLINE QUANTITY | 6 |
| AMDL | FIRST END DIAMETER | 1.0620 INCHES NOMINAL |
| AAHP | SECOND END STYLE | SPLINED (STRAIGHT) |
| AMFZ | SECOND END DIAMETER | 1.0000 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 9.375 INCHES NOMINAL |
| AMDH | FIRST END DISTANCE FROM KEYWAY CENTER TO END | 0.750 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | WOODRUFF KEYWAY |
| AMCZ | FIRST END KEYWAY WIDTH | 0.1880 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 1.562 INCHES NOMINAL |