Part Number
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. AN INTEGRAL FEATURE IS INCORPORATED FOR LOCKING ON THE THREADS OF A MATING MEMBER. DO NOT USE IF A MORE SPECIFIC ITEM NAME APPLIES. EXCLUDES COLLAR, PIN-RIVET, THREADED; INSERT, SCREW THREAD; NUT (1), SLEEVE; NUT(1), PLAIN, CAP; AND TURNBUCKLE BODY.
CAGE Information
| Code | Company |
|---|---|
| 78286 | SIKORSKY AIRCRAFT CORPORATION |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADBM | DRIVE POINT QUANTITY | 2 |
| ADBM | DRIVE POINT QUANTITY | 2 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| AAJD | THREAD CLASS | 3B |
| ASDB | WIDTH ACROSS FLATS | 2.234 INCHES MINIMUM AND 2.266 INCHES MAXIMUM |
| BZRR | THREAD SERIES | UN |
| ADBG | NUT THICKNESS | 0.216 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 2.000 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| ACTD | NUT DIAMETER | 2.359 INCHES MINIMUM AND 2.391 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 110.0 DEGREES NOMINAL NUT |
| SFTT | SURFACE TREATMENT | CADMIUM NUT |