Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER, AND WHOSE UNTHREADED PORTION HAS BEEN MACHINED OR GROUND IN ONE OR MORE PLACES OR OVER ITS ENTIRE LENGTH TO A MAXIMUM DIAMETER LESS THAN THE MINIMUM PITCH DIAMETER OF THE THREAD (EXCLUDES UNDERCUT FOR THREAD RELIEF). IT IS NO. 0 (0.060 IN.) (1.5 MM) OR LARGER, AND IS DESIGNED TO BE HELD OR DRIVEN WITH EITHER A WRENCH OR INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) OR BOTH IN SIZES BELOW NO. 10 (0.190 IN.) (5 MM) AND LARGER SIZES MUST HAVE A HEAD DESIGNED FOR ANY TYPE INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) BUT MAY ALSO BE DESIGNED FOR EXTERNAL WRENCHING. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE ALSO BOLT, EXTERNALLY RELIEVED BODY AND BOLT, INTERNAL WRENCHING.
CAGE Information
| Code | Company |
|---|---|
| 54418 | MILTOPE CORPORATION DBA VT MILTOPE |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-25 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-25 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAWC | FIRST DIAMETER FROM HEAD | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.224 INCHES MINIMUM AND 0.276 INCHES MAXIMUM |
| AASK | HEAD STYLE | KNURLED NO. 2 |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| MATT | MATERIAL | STEEL COMP 303 OVERALL |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| FEAT | SPECIAL FEATURES | POINT STYLE NO. 6 0.125 IN. NOM LONG 60.0 DEGREE NOM POINT ANGLE 0.104 IN. MIN 0.120 IN. MAX DIA |
| AHYM | NOMINAL THREAD DIAMETER | 0.164 INCHES |
| AASB | FASTENER LENGTH | 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| AAJD | THREAD CLASS | 2A |
| AASA | THREAD LENGTH | 0.245 INCHES MINIMUM |
| AASL | HEAD DIAMETER | 0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |