Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , METALLIC
Definition:
A LENGTH OF METALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, METALLIC. EXCLUDES CONDUIT, ELECTRICAL; CONDUIT ASSEMBLY, ELECTRICAL; CASING, FLEXIBLE CONTROL; AND CASING, FLEXIBLE SHAFT ASSEMBLY.
CAGE Information
| Code | Company |
|---|---|
| 96103 | ATLANTIC JOHNSON INC |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ABKU | FLANGE THICKNESS | 0.500 INCHES NOMINAL 2ND END |
| ADJL | INNER CONVEYING TUBE STYLE | ANNULAR CLOSE-PITCH CORRUGATED |
| ABKG | BOLT CIRCLE DIAMETER | 3.875 INCHES NOMINAL 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| ABKG | BOLT CIRCLE DIAMETER | 3.125 INCHES NOMINAL 2ND END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 13.000 INCHES |
| CRXX | MEASURING METHOD AND LENGTH | 31.500 INCHES NOMINAL WORKING |
| AJEE | RAISED FACE DIAMETER | 2.875 INCHES NOMINAL 1ST END |
| AEPR | FLANGE OUTSIDE DIAMETER | 4.250 INCHES NOMINAL 2ND END |
| FEAT | SPECIAL FEATURES | A 90 DEG ELBOW IS LOCATED 16.031 IN. FROM FIRST END AND 15.469 IN. FROM SECOND END |
| AJED | RAISED FACE HEIGHT | 0.133 INCHES NOMINAL 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 200.0 POUNDS PER SQUARE INCH |
| CTCJ | FLANGE STYLE | ROUND W/ BOLT HOLES 1ST END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| AJED | RAISED FACE HEIGHT | 0.140 INCHES NOMINAL 1ST END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| AJEE | RAISED FACE DIAMETER | 2.000 INCHES NOMINAL 2ND END |
| ABJH | TEMP RATING | 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CTCJ | FLANGE STYLE | ROUND W/ BOLT HOLES 2ND END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 2ND END |
| ADJM | INNER CONVEYING TUBE MATERIAL | NICKEL-COPPER ALLOY, QQ-N-281, CLASS A |
| AEPR | FLANGE OUTSIDE DIAMETER | 5.000 INCHES NOMINAL 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| CRFY | FLOW ANGLE | 45.0 DEGREES 1ST END |
| ABKV | OUTSIDE DIAMETER | 2.359 INCHES NOMINAL |
| CQBD | BURST TEST PRESSURE | 400.0 POUNDS PER SQUARE INCH |
| CQGM | MAXIMUM OPERATING PRESSURE | 100.0 POUNDS PER SQUARE INCH |
| AHNX | BOLT HOLE DIAMETER | 0.625 INCHES NOMINAL 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AHNX | BOLT HOLE DIAMETER | 0.625 INCHES NOMINAL 2ND END |
| AARX | INSIDE DIAMETER | 1.500 INCHES NOMINAL |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL, QQ-S-763, CLASS 316 |
| CRLL | SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATED |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATED |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED NICKEL COPPER ALLOY WIRE |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL, QQ-S-763, CLASS 316 |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 105.0 |
| AHNC | CONNECTION STYLE | RAISED SWIVEL 1ST END |
| AHNC | CONNECTION STYLE | RAISED SWIVEL 2ND END |
| ABKU | FLANGE THICKNESS | 0.500 INCHES NOMINAL 1ST END |