Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 72166 | B.W. ELLIOTT MANUFACTURING CO. LLC D |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMDN | FIRST END SPLINE MINOR DIAMETER | 0.4380 INCHES NOMINAL |
| AMDR | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 0.5420 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.7300 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 15 |
| AAGZ | FIRST END STYLE | SPLINED (INVOLUTE) |
| AGAV | END ITEM IDENTIFICATION | USED ON UNIVERSAL AMMO LOADER |
| MATT | MATERIAL | STEEL |
| CSPY | LARGEST STEP DIAMETER | 1.314 INCHES NOMINAL |
| BDSQ | FIRST END SPLINE QUANTITY | 15 |
| ABHP | OVERALL LENGTH | 7.700 INCHES NOMINAL |
| AMDS | FIRST END PITCH DIAMETER | 0.4688 INCHES NOMINAL |
| AMDM | FIRST END SPLINE LENGTH | 0.8800 INCHES NOMINAL |
| AAHN | END SIMILARITY | IDENTICAL |