Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , METALLIC
Definition:
A LENGTH OF METALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, METALLIC. EXCLUDES CONDUIT, ELECTRICAL; CONDUIT ASSEMBLY, ELECTRICAL; CASING, FLEXIBLE CONTROL; AND CASING, FLEXIBLE SHAFT ASSEMBLY.
CAGE Information
| Code | Company |
|---|---|
| 78570 | SMITHS TUBULAR SYSTEMS-LACONIA INC. |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ADJM | INNER CONVEYING TUBE MATERIAL | STEEL, CORROSION RESISTING |
| CRDW | HYDROSTATIC TEST PRESSURE | 120.0 POUNDS PER SQUARE INCH |
| ADJS | EXTERIOR COLOR | NATURAL |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| CTCJ | FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 1ST END |
| AHNC | CONNECTION STYLE | PLAIN SWIVEL 1ST END |
| AHNC | CONNECTION STYLE | PLAIN SWIVEL 2ND END |
| AGFF | FLANGE WIDTH | 2.460 INCHES NOMINAL 1ST END |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL, CORROSION RESISTING |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.808 INCHES NOMINAL 1ST END |
| CTCJ | FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 2ND END |
| AGFF | FLANGE WIDTH | 2.460 INCHES NOMINAL 2ND END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| ADJL | INNER CONVEYING TUBE STYLE | ANNULAR OPEN-PITCH CORRUGATED |
| AARX | INSIDE DIAMETER | 1.380 INCHES NOMINAL |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.808 INCHES NOMINAL 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| AAJP | OUTSIDE SURFACE TREATMENT | PASSIVATED |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CRLL | SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATED |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATED |
| AHNX | BOLT HOLE DIAMETER | 0.266 INCHES NOMINAL 1ST END |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.808 INCHES NOMINAL 1ST END |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| AFQN | FLANGE LENGTH | 2.460 INCHES NOMINAL 1ST END |
| AAJQ | INSIDE SURFACE TREATMENT | PASSIVATED |
| AHNX | BOLT HOLE DIAMETER | 0.266 INCHES NOMINAL 2ND END |
| CRXX | MEASURING METHOD AND LENGTH | 18.750 INCHES NOMINAL WORKING |
| AFQN | FLANGE LENGTH | 2.460 INCHES NOMINAL 2ND END |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.808 INCHES NOMINAL 2ND END |
| ABKU | FLANGE THICKNESS | 0.360 INCHES NOMINAL 1ST END |
| CQGM | MAXIMUM OPERATING PRESSURE | 60.0 POUNDS PER SQUARE INCH |
| ABKU | FLANGE THICKNESS | 0.360 INCHES NOMINAL 2ND END |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL, CORROSION RESISTING |
| ABKV | OUTSIDE DIAMETER | 2.290 INCHES NOMINAL |
| CQBD | BURST TEST PRESSURE | 240.0 POUNDS PER SQUARE INCH |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 9.000 INCHES |