Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code |
Company |
| 03670 |
TYCO FIRE PRODUCTS LP DBA TYCO FIRE |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AAGZ |
FIRST END STYLE |
PLAIN |
| ABHP |
OVERALL LENGTH |
2.688 INCHES NOMINAL |
| AMDL |
FIRST END DIAMETER |
0.7500 INCHES NOMINAL |
| AAHP |
SECOND END STYLE |
EXTERNAL THREADED |
| ATPC |
STEP QUANTITY |
8 |
| AMFZ |
SECOND END DIAMETER |
0.3100 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| CSPY |
LARGEST STEP DIAMETER |
0.750 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
TY 303-18-8 ASSN STD SINGLE MATERIAL RESPONSE |
| AMHA |
SECOND END EXTERNAL THREAD LENGTH |
0.375 INCHES NOMINAL |
Similar Parts