Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , METALLIC
Definition:
A LENGTH OF METALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, METALLIC. EXCLUDES CONDUIT, ELECTRICAL; CONDUIT ASSEMBLY, ELECTRICAL; CASING, FLEXIBLE CONTROL; AND CASING, FLEXIBLE SHAFT ASSEMBLY.
CAGE Information
| Code | Company |
|---|---|
| 88277 | BOEING COMPANY THE DBA BOEING |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CBBL | FEATURES PROVIDED | NUTS DRILLED FOR LOCKWIRE |
| CBBL | FEATURES PROVIDED | NUTS DRILLED FOR LOCKWIRE |
| CRDW | HYDROSTATIC TEST PRESSURE | 2800.0 POUNDS PER SQUARE INCH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| ADJL | INNER CONVEYING TUBE STYLE | ANNULAR CLOSE-PITCH CORRUGATED |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 1.750 INCHES |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END |
| ADJM | INNER CONVEYING TUBE MATERIAL | STEEL, CORROSION RESISTING OR STEEL, QQ-S-763 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND HYDRAULIC SOLUTION RESISTANT |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL, CORROSION RESISTING |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES 1ST END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 1ST END |
| ADJS | EXTERIOR COLOR | NATURAL OR SILVER |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| AARX | INSIDE DIAMETER | 0.312 INCHES NOMINAL |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES 2ND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| AAJD | THREAD CLASS | 3B 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CRLL | SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATED |
| AAJD | THREAD CLASS | 3B 2ND END |
| CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATED |
| AKUU | END CONNECTION DESIGN | STRAIGHT 2ND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL, CORROSION RESISTING |
| ABKV | OUTSIDE DIAMETER | 0.531 INCHES MINIMUM AND 0.672 INCHES MAXIMUM |
| CRXX | MEASURING METHOD AND LENGTH | 48.875 INCHES MINIMUM OVERALL AND 49.875 INCHES MAXIMUM OVERALL |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |