Part Number
Part Number:
NSN:
NIIN:
Item Name:
TERMINAL BOARD
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
CAGE Information
| Code |
Company |
| 05690 |
BARKER & WILLIAMSON |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| MATT |
MATERIAL |
PLASTIC MELAMINE BOARD AND SILICA BOARD |
| MATT |
MATERIAL |
PLASTIC MELAMINE BOARD AND SILICA BOARD |
| ABCX |
BOARD CONSTRUCTION |
SOLID CONSTRUCTION |
| ABGT |
BOARD THICKNESS |
0.062 INCHES |
| MARK |
SPECIAL MARKINGS |
R125,R126,R127,R121,R128,R124,R115 |
| AAMA |
MOUNTING HOLE DIAMETER |
0.161 INCHES |
| ABCS |
TERMINAL ROW QUANTITY |
2 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-14,TYPE MME MIL SPEC SINGLE MATERIAL RESPONSE BOARD |
| CWLG |
TERMINAL PATTERN ARRANGEMENT |
MULTI-ROW |
| CRNL |
NONFEEDTHRU TERMINAL TYPE |
F6 SINGLE |
| ABCT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.500 INCHES |
| AAQL |
BODY STYLE |
STRIP TYPE |
| CWLN |
TERMINAL DESIGN |
NONFEEDTHRU |
| ABGP |
BOARD OVERALL WIDTH |
2.375 INCHES |
| CSCS |
NONFEEDTHRU TERMINAL QUANTITY |
14 SINGLE |
| ABDX |
DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY |
0.375 INCHES |
| ABDW |
DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE |
0.938 INCHES |
| ABGN |
BOARD OVERALL LENGTH |
3.500 INCHES |
| ABCU |
DISTANCE BETWEEN TERMINAL ROW CENTERS |
2.000 INCHES |
| ABDU |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
2.625 INCHES |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 UNTHREADED HOLE |
Similar Parts