Part Number
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTRUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE OUTSIDE DIAMETER, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. SEE ALSO NUT (1), PLAIN, KNURLED. (WHEN HEIGHT OR THICKNESS AND/OR OUTSIDE DIAMETER IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
CAGE Information
| Code | Company |
|---|---|
| 80212 | BAE SYSTEMS LAND & ARMAMENTS L.P. |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ACTD | NUT DIAMETER | 0.618 INCHES MINIMUM AND 0.632 INCHES MAXIMUM |
| ACTD | NUT DIAMETER | 0.618 INCHES MINIMUM AND 0.632 INCHES MAXIMUM |
| ADBH | DRIVE POINT WIDTH | 0.118 INCHES MINIMUM AND 0.132 INCHES MAXIMUM |
| ADBM | DRIVE POINT QUANTITY | 2 |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
| CQFM | HARDNESS RATING | NOT RATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MATT | MATERIAL | STEEL COMP 416 OVERALL |
| AZKQ | TEMP RATING | NOT RATED |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| ACTA | NUT STYLE | ROUND |
| BZRR | THREAD SERIES | UNC |
| ABQU | DRIVE POINT DEPTH | 0.118 INCHES MINIMUM AND 0.132 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 2B |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ADBG | NUT THICKNESS | 0.368 INCHES MINIMUM AND 0.382 INCHES MAXIMUM |