Part Number
Part Number:
NSN:
NIIN:
Item Name:
MICROCIRCUIT , DIGITAL
Definition:
A MICROCIRCUIT SPECIFICALLY DESIGNED TO GENERATE, MODIFY, OR PROCESS ELECTRICAL SIGNALS WHICH OPERATE WITH TWO DISTINCT OR BINARY STATES. THESE STATES ARE COMMONLY REFERRED TO AS ON AND OFF, TRUE AND FALSE, HIGH AND LOW, OR "1" AND "0".
CAGE Information
| Code | Company |
|---|---|
| 57962 | STMICROELECTRONICS INC |
Federal Supply Class
Title
MICROCIRCUITS, ELECTRONIC
Inclusions:
INCLUDES INTEGRATED CIRCUIT DEVICES; INTEGRATED CIRCUIT MODULES, INTEGRATED ELECTRONIC DEVICES: HYBRID, MAGNETIC, MOLECULAR, OPTO-ELECTRONIC, AND THIN FILM.
Exclusions:
EXCLUDES SINGLE CIRCUIT ELEMENTS SUCH AS CAPACITORS; RESISTORS; DIODES AND TRANSISTORS; PRINTED CIRCUIT BOARDS AND CIRCUIT CARD ASSEMBLIES; AND FILTERS AND NETWORKS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS |
| CQZP | INPUT CIRCUIT PATTERN | DUAL 5 INPUT |
| CQWX | OUTPUT LOGIC FORM | DIODE-TRANSISTOR LOGIC |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 15.0 VOLTS MAXIMUM POWER SOURCE |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | -0-001-AG JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| ADAT | BODY WIDTH | 0.245 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.120 INCHES MINIMUM AND 0.195 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.750 INCHES MINIMUM AND 0.795 INCHES MAXIMUM |
| AFJQ | STORAGE TEMP RANGE | -65.0/+150.0 DEG CELSIUS |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND EDGE TRIGGERED AND RESETTABLE |
| CSSL | DESIGN FUNCTION AND QUANTITY | 2 FLIP-FLOP, J-K/R-S, CLOCKED |
| TTQY | TERMINAL TYPE AND QUANTITY | 16 PRINTED CIRCUIT |
| CQSJ | INCLOSURE MATERIAL | CERAMIC AND GLASS |
| TEST | TEST DATA DOCUMENT | 96214-537050 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |