Part Number
Definition:
A HIGH STRENGTH, 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH EXTERNALLY THREADED FASTENER DESIGNED FOR USE IN APPLICATIONS INVOLVING GREAT SHEAR STRESS. THE HEAD IS DESIGNED TO ACCOMMODATE AN EXTERNAL WRENCH OR DRIVER. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. THE UNTHREADED PORTION IS OF SPECIFIC GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE BOLT, MACHINE AND BOLT, CLEVIS.
CAGE Information
| Code | Company |
|---|---|
| 17446 | HUCK INTERNATIONAL INC. DBA ALCOA FA |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AAZH | HEAD MINOR DIAMETER | 0.448 INCHES MINIMUM AND 0.455 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CRHC | HOLE CONFIGURATION STYLE | SPLINE |
| AATD | EXTENDED WASHER THICKNESS | 0.044 INCHES MINIMUM AND 0.064 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AATC | EXTENDED WASHER DIAMETER | 0.691 INCHES MINIMUM AND 0.701 INCHES MAXIMUM |
| AASK | HEAD STYLE | SPLINE EXTENDED WASHER |
| AASA | THREAD LENGTH | 0.589 INCHES MINIMUM AND 0.639 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ANEE | GRIP LENGTH | 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| ASXK | HOLE QUANTITY | 4 |
| AASB | FASTENER LENGTH | 1.974 INCHES MINIMUM AND 2.004 INCHES MAXIMUM |
| BQDM | HOLE TYPE | DRILLED |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| AAUB | HOLE DIAMETER | 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AASU | HEAD HEIGHT | 0.263 INCHES MINIMUM AND 0.303 INCHES MAXIMUM |