Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 78570 | SMITHS TUBULAR SYSTEMS-LACONIA INC. |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL-H-27267,SIZE 4 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL-H-27267,SIZE 4 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| ZZZK | SPECIFICATION/STANDARD DATA | 73342-6851549 MANUFACTURERS SOURCE CONTROL |
| CQQN | EXTERNAL PROTECTION TYPE AND LOCATION | OVERALL FIRE SHIELD, SILICONE RUBBER COATED ASBESTOS BRAID |
| THSD | THREAD SERIES DESIGNATOR | UNJF 1ST END |
| AARX | INSIDE DIAMETER | 0.173 INCHES NOMINAL |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL, CORROSION RESISTING |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 2.000 INCHES |
| THSD | THREAD SERIES DESIGNATOR | UNJF 2ND END |
| CQBD | BURST TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| ADJM | INNER CONVEYING TUBE MATERIAL | PLASTIC, POLYTETRAFLUOROETHYLENE |
| ABKV | OUTSIDE DIAMETER | 0.343 INCHES NOMINAL |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| CRXX | MEASURING METHOD AND LENGTH | 13.875 INCHES NOMINAL WORKING |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| AAJD | THREAD CLASS | 3B 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | HYDRAULIC SOLUTION RESISTANT AND VIBRATION RESISTANT AND ETHYLENE GLYCOL RESISTANT AND FUEL RESISTANT AND WATER RESISTANT |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES 2ND END |
| CQGM | MAXIMUM OPERATING PRESSURE | 750.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AGAV | END ITEM IDENTIFICATION | GENERAL MOTORS ENGINE ASSEMBLY,GAS TURBINE MODEL 501K34 |
| CRLL | SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATED |
| AAJD | THREAD CLASS | 3B 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATED |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL, CORROSION RESISTING |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |