Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 77260 | PIERCE CO INC THE SUB OF AVIS INDUST |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| AMDL | FIRST END DIAMETER | 0.3750 INCHES NOMINAL |
| AMGS | SECOND END HOLE DIAMETER | 0.0935 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.2500 INCHES NOMINAL |
| AAHP | SECOND END STYLE | UNTHREADED CROSS DRILLED |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.250 INCHES NOMINAL |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| ATPC | STEP QUANTITY | 2 |
| CSPY | LARGEST STEP DIAMETER | 0.375 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | FIRST END,SLOT,0.125 INCH WIDE,0.750 INCH LONG;FIRST END,INTERNAL UNTHREADED HOLE,0.251 INCH DIAMETER,0.750 INCH LONG;SECOND END HAS STRAIGHT KNURL |
| AMHD | SECOND END HOLE DEPTH | 0.250 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.438 INCHES NOMINAL |