Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 88277 | BOEING COMPANY THE DBA BOEING |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM THREADS AND 0.151 INCHES MAXIMUM THREADS |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DPS 9.84, TYPE 1, CAGE 88277 MFR REF SINGLE TREATMENT RESPONSE GRIP |
| AAUR | GRIP DIAMETER | 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DPS 9.74, TYPE 1 CAGE 88277 MFR REF SINGLE TREATMENT RESPONSE THREADS |
| AAJD | THREAD CLASS | 3A |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DPS 9.84, TYPE 1,CAGE 88277 MFR REF SINGLE TREATMENT RESPONSE BEARING SURFACE OF HEAD |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.819 INCHES NOMINAL THREADS |
| SFTT | SURFACE TREATMENT | CADMIUM HEAD |
| SFTT | SURFACE TREATMENT | CHROMIUM GRIP |
| MATT | MATERIAL | STEEL COMP 4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL |
| AASU | HEAD HEIGHT | 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES GRIP |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE OVERALL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM THREADS |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DPS 9.74, TYPE 1, CAGE 88277 MFR REF SINGLE TREATMENT RESPONSE HEAD |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| CQBC | MINIMUM TENSILE STRENGTH | 95000 POUNDS PER SQUARE INCH |
| AASK | HEAD STYLE | DISHED HEXAGON |
| AATB | WIDTH BETWEEN FLATS | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.974 INCHES MINIMUM AND 2.004 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | CHROMIUM BEARING SURFACE OF HEAD |
| AASA | THREAD LENGTH | 0.864 INCHES MAXIMUM |