Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 3U011 | SWIFT FILTERS INC. |
Federal Supply Class
Title
AIRCRAFT HYDRAULIC, VACUUM, AND
Inclusions:
INCLUDES HYDRAULIC AND PNEUMATIC ACCUMULATORS, PUMPS, MOTORS, ACTUATING CYLINDERS, AND FILTERS; DE-ICING BOOTS; FLUID TYPE DE-ICING PUMPS, VALVES AND FILTERS; VACUUM SYSTEM OIL SEPARATORS; PNEUMATIC PRESSURIZATION EQUIPMENT OTHER THAN THAT FOR PRESSURIZING CABINS AND COMPARTMENTS.
Exclusions:
EXCLUDES JET ENGINE HYDRAULIC COMPONENTS (FSC 2840); VALVES SPECIFICALLY DESIGNED FOR AIR CONDITIONING, HEATING, VENTILATING, CABIN PRESSURIZING, AND THERMAL DE-ICING (FSC 1660); VALVES SPECIFICALLY DESIGNED FOR USE WITH AIRCRAFT ENGINES (FSC 2840); GUIDED MISSILES AND GUIDED MISSILE ENGINES (FSC 1338), LANDING GEAR (FSC 1620), WHEEL AND BRAKE SYSTEM COMPONENTS (FSC 1630); OXYGEN BREATHING SYSTEM COMPONENTS (FSC 1660); IN-FLIGHT REFUELING SYSTEM HYDRAULIC COMPONENTS (FSC 1680); SPECIFICALLY DESIGNED HYDRAULIC POWER STEERING SYSTEM COMPONENTS (FSC 1620).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 2A TYPE |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 2A TYPE |
| APGF | DESIGN TYPE | NONREUSABLE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| ADNK | FLOW DIRECTION | OUTSIDE IN |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-25897 MIL SPEC SINGLE MATERIAL RESPONSE SEAL |
| ZZZK | SPECIFICATION/STANDARD DATA | 88044-AN6235 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| ADNP | DROP PRESSURE | NOT RATED |
| CXZX | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
| ADAS | BODY INSIDE DIAMETER | 0.625 INCHES NOMINAL |
| ADNQ | DIFFERENTIAL PRESSURE | 150.0 POUNDS PER SQUARE INCH |
| FEAT | SPECIAL FEATURES | W/ END CAPS |
| ADNH | FILTRATION RATING IN MICRONS | 10.0 NOMINAL |
| ABPM | BODY DIAMETER | 1.125 INCHES NOMINAL |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| AZTL | BODY OVERALL LENGTH | 4.625 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER |
| MATT | MATERIAL | CELLULOSE FILTERING MEDIUM AND RESIN SYNTHETIC FILTERING MEDIUM |
| CRXW | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE |
| AZKQ | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 275.0 DEG FAHRENHEIT MAXIMUM |