Part Number
Definition:
AN ITEM CONSISTING OF A CASING WITH FITTINGS AND ATTACHMENTS ON EACH END AND A SPIRALLY WOUND WIRE CORE WITH FORMED END(S) AND/OR CRIMPED ON END FITTINGS. IT IS DESIGNED TO TRANSMIT ROTARY MOTION AROUND BENDS FROM A MOTOR OR OTHER POWER SOURCE TO DRIVE VARIOUS TYPES OF EQUIPMENT, SUCH AS TACHOMETERS, SPEEDOMETERS, REMOTE CONTROLS, INSTRUMENTS, AND THE LIKE, WHICH ARE LOCATED AT AN ANGLE AND/OR DISTANCE FROM THE POWER SOURCE. SEE ALSO CONTROL ASSEMBLY, PUSH-PULL.
CAGE Information
| Code | Company |
|---|---|
| 78286 | SIKORSKY AIRCRAFT CORPORATION |
Federal Supply Class
Title
MISCELLANEOUS AIRCRAFT ACCESSORI
Inclusions:
INCLUDES CONTROL ASSEMBLIES, PUSH-PULL; BRACE, POSITIONING CARGO RAMP STOWED ON BOARD; COCKPIT MOUNTED CONTROL QUADRANTS; ACTUATORS, ELECTRO-MECHANICAL AND MECHANICAL; VENTILATORS; RELIEF TUBES; MAP HOLDERS; AERIAL GLIDER TOWING ACCESSORIES ATTACHED TO AIRCRAFT; BELTS, SAFETY AND LAP; HARNESS, SHOULDER AND SAFETY; LITTER ATTACHING SUPPORTS;ELECTRIC WINDSHIELD WIPERS;AIRCRAFT ONBOARD INERT GAS GENERATORS;AIRCRAFT FURNITURE;AIRCRAFT MOUNTED WINCHES AND HOISTS;IN-FLIGHT REFUELING SYSTEM COMPONENTS, INCLUDING FUEL COMPONENTS;AIRCRAFT CURTAINS;CABLE TENSION REGULATORS;SUN VISORS;REAR-VIEW MIRRORS;MECHANICAL TRANSMISSIONS, GEARBOXES AND CONSTANT SPEED DRIVES SPECIALLY DESIGNED FOR AIRCRAFT.
Exclusions:
EXCLUDES ENGINE MOUNTED CONTROL ASSEMBLIES; FITTED COVERS, AIRCRAFT PYLONS; HELICOPTER ROTER BRAKE SYSTEM COMPONENTS; HELICOPTER AUTOMATIC STABILIZATION EQUIPMENT.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF FIRST END |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF FIRST END |
| APTD | END TYPE | ROUND FEMALE SECOND END |
| CFRN | CASING SURFACE TREATMENT | PASSIVATED |
| ZZZV | FSC APPLICATION DATA | PEDALS,CONTROL,ACFT |
| AXYS | SPLINE TYPE | INVOLUTE FIRST END |
| AKMH | CORE DIAMETER | 0.187 INCHES NOMINAL |
| CFSB | CORE ROTATION DIRECTION | COUNTERCLOCKWISE |
| AEDN | TIP LENGTH | 0.250 INCHES NOMINAL SECOND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND FIRST END |
| CFSD | CORE TIP THREAD SERIES DESIGNATOR (NON-CORE) | ERR-070 |
| ABUJ | THREAD SIZE (NON-CORE) | ERR-070 |
| AWZY | END CONNECTION TYPE | PLAIN FERRULE SECOND END |
| ASDB | WIDTH ACROSS FLATS | 0.375 INCHES NOMINAL FIRST END |
| BPPL | WRENCHING FACILITY TYPE | KNURLED SURFACE SECOND END |
| APJC | THREAD LOCATION | INTERNAL FIRST END |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.375 INCHES CLEANING WIRE ANY ACCEPTABLE FIRST END |
| ABSC | SPLINE MINOR DIAMETER | 0.281 INCHES NOMINAL FIRST END |
| AWZY | END CONNECTION TYPE | UNION FERRULE FIRST END |
| CFRP | CASING LENGTH BETWEEN FERRULES | 44.063 INCHES NOMINAL |
| AXFH | SPLINE LENGTH | 0.211 INCHES NOMINAL FIRST END |
| CFRZ | CORE OVERALL LENGTH | 45.500 INCHES NOMINAL |
| ABSA | SPLINE QUANTITY | 12 FIRST END |
| AGPX | SHOULDER OUTSIDE DIAMETER | 0.875 INCHES NOMINAL SECOND END |
| AGGZ | SHANK OUTSIDE DIAMETER | 0.343 INCHES NOMINAL FIRST END |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.750 INCHES CLEANING WIRE ANY ACCEPTABLE SECOND END |
| CFSC | CORE TIP THREAD SIZE (NON-CORE) | ERR-070 |
| CFRW | END OVERALL DIAMETER | 0.500 INCHES NOMINAL SECOND END |
| CFRQ | CASING OUTSIDE DIAMETER | 0.343 INCHES NOMINAL |
| AGGZ | SHANK OUTSIDE DIAMETER | 0.343 INCHES NOMINAL SECOND END |
| AGJS | PITCH DIAMETER | 0.250 INCHES NOMINAL FIRST END |
| AJXJ | CORE MATERIAL | STEEL |
| BJPS | CASING MATERIAL | STEEL, CORROSION RESISTING |
| ADMS | WRENCHING FACILITY OUTSIDE DIAMETER | 0.875 INCHES NOMINAL SECOND END |
| ABHP | OVERALL LENGTH | 45.500 INCHES NOMINAL |
| AEDN | TIP LENGTH | 0.500 INCHES NOMINAL FIRST END |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 14.5 FIRST END |
| CFRT | SWIVEL END | NOT PROVIDED SECOND END |
| CFSF | CORE TIP THREAD CLASS | 2B SECOND END |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| CFSH | CORE TIP THREAD DIRECTION | RIGHT-HAND SECOND END |
| CFRY | LUBRICATION FITTING | NOT PROVIDED FIRST END |
| CFRW | END OVERALL DIAMETER | 0.437 INCHES NOMINAL FIRST END |
| BDRL | SETSCREW | NOT INCLUDED FIRST END |
| CFRY | LUBRICATION FITTING | NOT PROVIDED SECOND END |
| CFRT | SWIVEL END | PROVIDED FIRST END |
| AECT | THREAD DEPTH | 0.562 INCHES NOMINAL FIRST END |
| BDRL | SETSCREW | NOT INCLUDED SECOND END |
| AAUJ | SPLINE MAJOR DIAMETER | 0.312 INCHES NOMINAL FIRST END |
| APTD | END TYPE | ROUND, INTERNAL SPLINED FIRST END |
| AAJD | THREAD CLASS | 2B FIRST END |
| BPPL | WRENCHING FACILITY TYPE | HEXAGON FIRST END |