Part Number
Part Number:
NSN:
NIIN:
Item Name:
GEAR , SPUR
Definition:
A GEAR, CYLINDRICAL IN FORM, WITH STRAIGHT TEETH ON THE OUTER SURFACE PARALLEL TO THE AXIS OF THE GEAR. SEE ALSO GEAR, ANTIBACKLASH, SPUR. FOR BULK MATERIAL, SEE ROD, PINION.
CAGE Information
| Code | Company |
|---|---|
| 47496 | THE DEWEY ELECTRONICS CORPORATION DB |
Federal Supply Class
Title
GEARS, PULLEYS, SPROCKETS, AND T
Inclusions:
INCLUDES POWER TRANSMISSION CHAIN; MATCHED GEAR SETS.
Exclusions:
EXCLUDES REDUCTION GEARS (FSC 3010).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B16 ASSN STD SINGLE MATERIAL RESPONSE BODY |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| CWRS | BORE NOMINAL DIAMETER | 0.350 INCHES BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 0.627 INCHES SECOND END |
| MATT | MATERIAL | PLASTIC PHENOLIC TEETH |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| AAQL | BODY STYLE | PLAIN, SOLID |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.312 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.188 INCHES |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MATT | MATERIAL | COPPER ALLOY BODY |
| AGJS | PITCH DIAMETER | 1.9970 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | 0.164 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 0.875 INCHES FIRST END |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-15035 TYPE FBM MIL SPEC SINGLE MATERIAL RESPONSE TEETH |
| AJLA | TEETH QUANTITY | 48 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| FEAT | SPECIAL FEATURES | THREADED HOLES LOCATED 90 DEG APART,1 SECURING HOLE COUNTERBORE 3/16 IN. DIA BY 1/8 IN. DEEP |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.079 INCHES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.015 INCHES SECOND END |
| CWNH | TOOTH FORM | STANDARD |