Part Number
Part Number:
NSN:
NIIN:
Item Name:
PIN , STRAIGHT , HEADLESS
Definition:
A HEADLESS, CYLINDRICALLY-SHAPED ITEM HAVING A STRAIGHT, SMOOTH, SOLID BODY, WITH OR WITHOUT A DRILLED HOLE(S). IT HAS AN OUTSIDE DIAMETER EQUAL TO OR LESS THAN ITS LENGTH. ITS LENGTH MUST NOT EXCEED TWELVE INCHES (304 MM); FOR ITEMS WHOSE LENGTH EXCEEDS TWELVE INCHES (304 MM); SEE ROD, STRAIGHT, HEADLESS. IT IS USED FOR ALIGNING OR TRANSFER OF TORQUE AND/OR THRUST, BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. SEE ALSO PIN, STRAIGHT, THREADED.
CAGE Information
| Code | Company |
|---|---|
| 70210 | HONEYWELL INTERNATIONAL INC. DBA HON |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRMG | FIRST END TAPER ANGLE | 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM |
| CRMG | FIRST END TAPER ANGLE | 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM |
| CSYM | SURFACE FINISH | 40.0 MICROINCHES OUTSIDE DIAMETER |
| ACHU | PIN OVERALL DIAMETER | 0.0622 INCHES MINIMUM AND 0.0628 INCHES MAXIMUM |
| AMCS | FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.025 INCHES MAXIMUM |
| CRTL | CRITICALITY CODE JUSTIFICATION | ACHU |
| MATT | MATERIAL | STEEL COMP 303S OVERALL OR STEEL COMP 302 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-W-423 FED SPEC 2ND MATERIAL RESPONSE OVERALL |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| AAGZ | FIRST END STYLE | CHAMFERED |
| ACHT | PIN OVERALL LENGTH | 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |