Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , FLAT
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
CAGE Information
| Code |
Company |
| 70210 |
HONEYWELL INTERNATIONAL INC. DBA HON |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
RECTANGULAR |
| ADAV |
OVERALL DIAMETER |
0.240 INCHES NOMINAL |
| ABMX |
CENTER HOLE SHAPE STYLE |
ROUND |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-327 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ABMW |
PERIPHERAL SHAPE STYLE |
ROUND |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 OVERALL |
| AAUB |
HOLE DIAMETER |
0.145 INCHES NOMINAL |
| ABNM |
THICKNESS |
0.025 INCHES NOMINAL |
Similar Parts