Part Number
Part Number:
NSN:
NIIN:
Item Name:
MICROCIRCUIT , DIGITAL
Definition:
A MICROCIRCUIT SPECIFICALLY DESIGNED TO GENERATE, MODIFY, OR PROCESS ELECTRICAL SIGNALS WHICH OPERATE WITH TWO DISTINCT OR BINARY STATES. THESE STATES ARE COMMONLY REFERRED TO AS ON AND OFF, TRUE AND FALSE, HIGH AND LOW, OR "1" AND "0".
CAGE Information
| Code | Company |
|---|---|
| 18324 | PHILIPS SEMICONDUCTORS INC |
Federal Supply Class
Title
MICROCIRCUITS, ELECTRONIC
Inclusions:
INCLUDES INTEGRATED CIRCUIT DEVICES; INTEGRATED CIRCUIT MODULES, INTEGRATED ELECTRONIC DEVICES: HYBRID, MAGNETIC, MOLECULAR, OPTO-ELECTRONIC, AND THIN FILM.
Exclusions:
EXCLUDES SINGLE CIRCUIT ELEMENTS SUCH AS CAPACITORS; RESISTORS; DIODES AND TRANSISTORS; PRINTED CIRCUIT BOARDS AND CIRCUIT CARD ASSEMBLIES; AND FILTERS AND NETWORKS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | T0-116 JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| CSSL | DESIGN FUNCTION AND QUANTITY | 2 FLIP-FLOP, J-K, MASTER SLAVE |
| TTQY | TERMINAL TYPE AND QUANTITY | 14 PRINTED CIRCUIT |
| CZEQ | TIME RATING PER CHACTERISTIC | 50.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT AND 50.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT |
| ADAU | BODY HEIGHT | 0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| AFJQ | STORAGE TEMP RANGE | -65.0/+150.0 DEG CELSIUS |
| CQSJ | INCLOSURE MATERIAL | CERAMIC |
| ADAT | BODY WIDTH | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| CQZP | INPUT CIRCUIT PATTERN | DUAL 4 INPUT |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | -0.5 VOLTS MINIMUM POWER SOURCE AND 5.5 VOLTS MAXIMUM POWER SOURCE |
| CBBL | FEATURES PROVIDED | POSITIVE OUTPUTS AND W/ENABLE AND HERMETICALLY SEALED AND EDGE TRIGGERED |
| CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| TEST | TEST DATA DOCUMENT | 06481-970086 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| ADAQ | BODY LENGTH | 0.660 INCHES MINIMUM AND 0.785 INCHES MAXIMUM |