Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 98441 | PARKER-HANNIFIN CORPORATION DBA STRA |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| CQGM | MAXIMUM OPERATING PRESSURE | 500.0 POUNDS PER SQUARE INCH |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| CTCJ | FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 1ST END |
| AHNC | CONNECTION STYLE | PLAIN SWIVEL 1ST END |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 210.0 |
| ADLH | SECOND END FITTING SPEC/STD DATA | MIL-H-83798/3-20D SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRFY | FLOW ANGLE | 90.0 DEGREES 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UNJF 2ND END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| AARX | INSIDE DIAMETER | 1.125 INCHES NOMINAL |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.266 INCHES NOMINAL 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING ALUMINUM ALLOY |
| CRDW | HYDROSTATIC TEST PRESSURE | 1300.0 POUNDS PER SQUARE INCH |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| AFQN | FLANGE LENGTH | 2.188 INCHES NOMINAL 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQBD | BURST TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE ERR-100 |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| CRXX | MEASURING METHOD AND LENGTH | 18.375 INCHES NOMINAL OVERALL |
| AAJD | THREAD CLASS | 3B 2ND END |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.266 INCHES NOMINAL 1ST END |
| AGFF | FLANGE WIDTH | 2.188 INCHES NOMINAL 1ST END |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL-H-83797 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 8.000 INCHES |
| CQJX | NOMINAL THREAD SIZE | 1.625 INCHES 2ND END |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, SYNTHETIC |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING ALUMINUM ALLOY |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.266 INCHES NOMINAL 1ST END |
| ABKV | OUTSIDE DIAMETER | 1.437 INCHES NOMINAL |
| ADLG | FIRST END FITTING SPEC/STD DATA | MIL-H-83798/9-20D SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |