Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 10988 | CNH AMERICA LLC |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSPY | LARGEST STEP DIAMETER | 1.180 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| BDSR | SECOND END SPLINE QUANTITY | 16 |
| AAGZ | FIRST END STYLE | PLAIN |
| AMDL | FIRST END DIAMETER | 1.0312 INCHES NOMINAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.9375 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 1.0500 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| AMGF | SECOND END PITCH DIAMETER | 1.0000 INCHES NOMINAL |
| AAHP | SECOND END STYLE | SPLINED (INVOLUTE) |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.0500 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 9.375 INCHES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 1.375 INCHES NOMINAL |
| AMGE | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| ATPC | STEP QUANTITY | 5 |