Part Number
Part Number:
NSN:
NIIN:
Item Name:
GEAR , ANTIBACKLASH , SPUR
Definition:
AN ITEM HAVING ONE FIXED GEAR AND ONE FREE GEAR, BOTH HAVING THE SAME COMPLEMENT OF SPUR GEAR TEETH, MOUNTED ON A COMMON HUB. THE FREE GEAR IS ATTACHED TO THE FIXED GEAR BY SPRINGS AND OPERATES AS ONE GEAR. UPON INSTALLATION WITH THE MATING GEAR, THE TEETH OF THE FREE MOVING GEAR ARE PRESET TO MESH WITH TEETH OTHER THAN THOSE OF THE FIXED GEAR. THIS SPRING TENSION BETWEEN THE FIXED GEAR AND THE FREE GEAR ELIMINATES ANY FREE MOTION BETWEEN THE DRIVER AND THE DRIVEN GEAR. THE GEAR IS USED WHERE IDENTICAL AND ACCURATE TRANSMITTED MOTION BETWEEN GEARS IS REQUIRED.
CAGE Information
| Code | Company |
|---|---|
| 00328 | DESIGNATRONICS INCORPORATED DBA STER |
Federal Supply Class
Title
GEARS, PULLEYS, SPROCKETS, AND T
Inclusions:
INCLUDES POWER TRANSMISSION CHAIN; MATCHED GEAR SETS.
Exclusions:
EXCLUDES REDUCTION GEARS (FSC 3010).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AGJS | PITCH DIAMETER | 2.1865 INCHES MINIMUM AND 2.1875 INCHES MAXIMUM |
| AGJS | PITCH DIAMETER | 2.1865 INCHES MINIMUM AND 2.1875 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 303 OVERALL |
| AJLA | TEETH QUANTITY | 140 |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 0.104 INCHES |
| ABSX | ATTACHMENT METHOD | CLAMP |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
| CWTX | HUB NOMINAL DIAMETER | 0.250 INCHES FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.218 INCHES |
| CWTR | HUB STYLE DESIGNATOR | SPLIT FIRST END |
| CWWC | CLAMPING SURFACE NOMINAL LENGTH | 0.221 INCHES FIRST END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.221 INCHES FIRST END |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS302 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWRS | BORE NOMINAL DIAMETER | 0.187 INCHES BOTH ENDS |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 |
| CWNH | TOOTH FORM | STANDARD |