Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OF MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 73138 | BI TECHNOLOGIES CORPORATION |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 1800.0 1ST SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG |
| ADAU | BODY HEIGHT | 1.828 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AAPN | SECTION QUANTITY | 2 |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEFP | NONTURN DEVICE RADIUS | 0.562 INCHES NOMINAL |
| AEFN | NONTURN DEVICE LOCATION | AT 3 OCLOCK |
| ABXF | SHAFT LENGTH | 0.812 INCHES NOMINAL |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAQL | BODY STYLE | RECTANGULAR BUSHING MOUNTED |
| ABWV | SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.000 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 600.0 2ND SECTION AND 1800.0 2ND SECTION AND 1220.0 2ND SECTION AND 2380.0 2ND SECTION AND 3000.0 2ND SECTION |
| ADAQ | BODY LENGTH | 4.234 INCHES NOMINAL |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 80.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 ALL SECTIONS |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 100.000 PERCENT, RATED AMPERES C AND BETTER FINISH |
| ABPM | BODY DIAMETER | 1.828 INCHES MAXIMUM |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -1.0/+1.0 DEG ANGULAR ROTATION ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 5.0 FREE AIR ALL SECTIONS |
| CSDL | STANDARD TAPER CURVE PER SECTION | A ALL SECTIONS |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| ADAP | MOUNTING BUSHING LENGTH | 0.312 INCHES NOMINAL |
| ADAT | BODY WIDTH | 1.828 INCHES NOMINAL |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |