Part Number
Part Number:
NSN:
NIIN:
Item Name:
TERMINAL BOARD
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
CAGE Information
| Code |
Company |
| 80063 |
US ARMY COMMUNICATIONS & ELECTRONICS |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ABCX |
BOARD CONSTRUCTION |
SOLID CONSTRUCTION |
| ABCX |
BOARD CONSTRUCTION |
SOLID CONSTRUCTION |
| ABGN |
BOARD OVERALL LENGTH |
3.625 INCHES |
| MATT |
MATERIAL |
PLASTIC PHENOLIC BOARD AND PAPER BOARD |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
L-P-513,TYPE PBE FED SPEC SINGLE MATERIAL RESPONSE BOARD |
| AAMA |
MOUNTING HOLE DIAMETER |
0.161 INCHES |
| FEAT |
SPECIAL FEATURES |
NO. 5 TERMINAL IN TOP ROW IS LOCATED 0.875 IN. FROM BOTTOM EDGE OF BOARD |
| ABCS |
TERMINAL ROW QUANTITY |
2 |
| CWLG |
TERMINAL PATTERN ARRANGEMENT |
MULTI-ROW |
| ABCT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.500 INCHES |
| CSCS |
NONFEEDTHRU TERMINAL QUANTITY |
12 SINGLE |
| ABDW |
DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE |
0.875 INCHES |
| AAQL |
BODY STYLE |
STRIP TYPE |
| ABGT |
BOARD THICKNESS |
0.094 INCHES |
| CWLN |
TERMINAL DESIGN |
NONFEEDTHRU |
| ABGP |
BOARD OVERALL WIDTH |
1.750 INCHES |
| ABDX |
DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY |
0.188 INCHES |
| ABDU |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
3.250 INCHES |
| MARK |
SPECIAL MARKINGS |
C60,R6,C45,C6,R8,R13,R69,R11,R9,R58 |
| ABCU |
DISTANCE BETWEEN TERMINAL ROW CENTERS |
1.250 INCHES |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 UNTHREADED HOLE |
Similar Parts