Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , FLAT
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
CAGE Information
| Code |
Company |
| 80063 |
US ARMY COMMUNICATIONS & ELECTRONICS |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES TOP |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES TOP |
| MATT |
MATERIAL |
STEEL COMP 1006 OVERALL OR STEEL COMP 1020 OVERALL |
| ADAV |
OVERALL DIAMETER |
0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
RECTANGULAR |
| ABMX |
CENTER HOLE SHAPE STYLE |
ROUND |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BOTTOM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-F-14072,E211 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ABMW |
PERIPHERAL SHAPE STYLE |
ROUND |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE OVERALL |
| ABNM |
THICKNESS |
0.133 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| AAUB |
HOLE DIAMETER |
0.502 INCHES MINIMUM AND 0.509 INCHES MAXIMUM |
Similar Parts