Part Number
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. AN INTEGRAL FEATURE IS INCORPORATED FOR LOCKING ON THE THREADS OF A MATING MEMBER. DO NOT USE IF A MORE SPECIFIC ITEM NAME APPLIES. EXCLUDES COLLAR, PIN-RIVET, THREADED; INSERT, SCREW THREAD; NUT (1), SLEEVE; NUT(1), PLAIN, CAP; AND TURNBUCKLE BODY.
CAGE Information
| Code | Company |
|---|---|
| 97393 | SHUR-LOK COMPANY DBA SPS FASTENER DI |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABQU | DRIVE POINT DEPTH | 0.125 INCHES NOMINAL |
| CQJX | NOMINAL THREAD SIZE | 2.988 INCHES |
| TEST | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION |
| BZRR | THREAD SERIES | UNS |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL NUT |
| ADBG | NUT THICKNESS | 0.305 INCHES MINIMUM AND 0.335 INCHES MAXIMUM |
| AAJE | THREAD PITCH DIAMETERS | +2.9474/+2.9529 INCHES |
| CQFM | HARDNESS RATING | NOT RATED |
| AZKQ | TEMP RATING | 250.0 DEG FAHRENHEIT NOMINAL |
| ACTD | NUT DIAMETER | 3.579 INCHES MINIMUM AND 3.599 INCHES MAXIMUM |
| MATT | MATERIAL | PLASTIC POLYAMIDE LOCKING INSERT |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ZZZK | SPECIFICATION/STANDARD DATA | 81205-BACN10GR MANUFACTURERS STANDARD |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE NUT |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| ADBM | DRIVE POINT QUANTITY | 4 |
| SFTT | SURFACE TREATMENT | OXIDE NUT |
| FEAT | SPECIAL FEATURES | THREADS SQUARE WITHBEARING SURFACE BY 0.002 IN. |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| ADBH | DRIVE POINT WIDTH | 0.375 INCHES NOMINAL |
| ACTA | NUT STYLE | ROUND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE NUT |
| MATT | MATERIAL | STEEL COMP 4130 NUT |